GPS functionality online for determining the location and movement of the truck
Location control - allows you to see the movement of vehicles on the map, including analyzing the history of such movement.

Stop control - allows you to see all the stops of vehicles on the map and the exact time when the equipment was stopped.

Route control - allows you to view the vehicle route for any selected time interval and record all deviations from it.

Mileage control - allows you to control the exact mileage for any selected period of time.

Control of the operation of the executive mechanisms of the truck

The use of trailed equipment or other mechanism is displayed with reference to the address of the location or mark on the map of the actions taken.

Photo report - receiving photos according to a specified operation algorithm (for example, opening doors or 5 minutes of parking), or an operator's request. This photo can be viewed either in the vehicle monitoring program in the reports or comes to predefined email addresses.

Online functionality for determining the parameters of the truck engine

Monitoring of engine hours - allows you to determine the real operating time of the vehicle engine.

RPM control - allows you to see the current engine RPM, which, respectively, to determine and notify about unacceptable excess and dangerously low engine RPM. It also makes it possible to determine the driver's driving style and thereby extend the resources of the power unit, gearbox, axles and suspension.

Temperature control - allows you to control the temperature of the engine and prevent overheating.

Oil pressure monitoring - allows you to determine the fact of low engine oil pressure and signal the need to correct the situation.

Functionality of online determination of control of fuel consumption of a grizzly

Fuel level control in the tank - allows you to control all refueling and fuel drains, as well as to see the history of these events, as well as to determine the amount of fuel in the tank at any given time in order to punish the investigation for fuel theft.

Fuel consumption control - allows you to control fuel consumption, fuel consumption for a selected period of time, fuel consumption per 100 km of run or 1 hour of operation of equipment, so how the investigation determines cases of increased fuel consumption, which makes it possible to prevent these cases.

Control of passenger seats in the cabin of the truck

Control of the presence of passengers in the cabin - allows you to control the number of passengers in the cabin and view statistics on the number of passengers for any selected time interval.

Functional online definition of truck operation by geofences

Control of visits or work in a specific zone defined by the user - allows you to see and control the time of entry or exit to these control zones, as well as the mileage within these zones or between zones, as a rule, such zones as an office (control center, warehouse, city district, etc.) are created. etc.)

Functionality of online determination of parameters of the state of the truck suspension

Control of driving on holes and uneven roads - allows you to observe how accurately the driver drives on uneven roads, which, if properly worked with the driver, will save you a lot of money on repairing the chassis of vehicles.

Control of the smooth running of vehicles - allows you to monitor sudden acceleration and deceleration, as well as jerks when changing from gear to gear. Driving quality analysis and timely work with the driver significantly reduce the cost of vehicle repairs.

Extraction of information from the CAN bus of a vehicle in the presence of the CAN-interface protocol (J1939, FMS, J1979, OBD II, 29- and 11-bit identifiers) allows using the data of standard sensors installed by the vehicle manufacturer, which are transmitted to the on-board computer (engine speed , oil level, gas pedal position, coolant temperature and much more).

Voice two-way GSM communication between the driver and the dispatcher

Receiving information from external devices Garmin navigators,  tire pressure monitoring system, driver identifiers, passenger presence sensors, trailed equipment identifiers and much more, such as the free innovative ECO DRIVING system.

The possibilities of equipment for monitoring vehicles are very large, and only typical most frequently encountered solutions are indicated here, however, our company implements any wishes of the client.