WIRELESS FUEL LEVEL SENSORESCORT TD-BLE
The first wireless capacitive fuel level sensor on the market with Bluetooth Low Energy (BLE) technology!
This isn't just another innovation. It's an evolutionary leap into the wireless future of transport telematics!
It's never been easier to install a fuel monitoring system.
Installing and configuring traditional fuel level sensors takes a long time. The lack of wires will finally eliminate the tedious, time-consuming and more costly process of laying cables through the entire vehicle system. No wires - no problem.
Along with this, the risk of vandalism associated with interference with electrical wiring is eliminated. Moreover, the information on fuel is transferred to the control system as quickly, in the same volume and with the same accuracy as on wires.
7 years of continuous operation from just one battery.
Lithium-thionyl chloride batteries and, of course, Bluetooth 4.0 technology with low-energy feature, are the guarantee of long-term use of the sensor without replacing batteries. Thanks to Bluetooth Low Energy, the wireless fuel level sensor is able to perform its work from a single battery for several years.
New, robust, airtight, shockproof protection.
"Escort TD-BLE" enclosure is equipped with an additional protective casing made of impact-resistant polyamide and is distinguished by high endurance to various mechanical damages on all types of vehicles, special equipment, in stationary tanks and containers.
The function of the device will not be affected by polarity inversions, voltage surges, interference and attempts to deliberately disrupt its performance, for example, with a stun gun. As in the case with other equipment produced by "Escort", any unauthorized interference with the TD-BLE will be recorded in the monitoring system.
The sensor is safely isolated from dust and moisture ingress as its housing has IP69 protection degree according to GOST 14254. Stable operation of the equipment will not be disturbed by critical changes in temperature (-30 … +85 °C) and atmospheric pressure (84 … 106.7 kPa). Due to thermal compensation algorithm "Escort TD-BLE" automatically corrects the fuel level when the exterior environment characteristics change.
Even in the most extreme operating conditions the "Escort TD-BLE" sensor guarantees continuous and accurate monitoring of fuel consumption!
TECHNICAL CHARACTERISTICS
| The measurement error in the work-space, no more |
1% |
| Operation mode |
digital |
Digital mode:
- interface
- the communication protocol |
Bluetooth LE (BLE)
Escort BLE |
| Range (under normal operating conditions in the absence of interference and obstacles when working with the base) |
not less than 10 meters |
| The period of data exchange with the base |
10 seconds |
| The sensitivity of the receiver / transmitter power |
-96 dBm / 4 dBm |
| The degree of protection according to GOST 14254 |
IP69S |
| Protection against electrocution by GOST 12.2.007.0 |
class III |
| Type of explosion protection |
intrinsically safe electrical circuit ("ia" level of protection) |
| Explosion proof mark |
OEx ia IIB T6 X |
| Categories of explosive mixtures according to GOST R IEC 60079-20-1-2011 |
categories IIA, IIB |
| Explosion hazardous areas according to GOST IEC 60079-10-1-2011 |
0; 1 and 2 |
Operation conditions:
- temperature, °C
- ambient temperature, °C
- atmosphere pressure, kPa
- ambient atmosphere pressure, kPa |
- 45 … + 50
- 60 … + 85
84 … 106.7
57 … 110 |
| Dimensions, no more |
90x90x(L + 38)mm, where L - sensor length in mm |
| Conditional sensor length |
Indicated on the label (pasted in the passport) |
| Weight, no more |
0,35+0,4хL, where L - is the sensor length in meters |
| Supply voltage, no more V |
3,6 |
